3-D PIC Numerical Investigations of a Novel Concept of Multistage Axial Vircator for Enhanced Microwave Generation
Résumé
The enhancement of power conversion efficiency of a classical axial VIRtual CAthode oscillaTOR (vircator) by introducing one or more reflectors beyond the anode in the cylindrical waveguide is numerically investigated. The targeted microwave (MW) output frequency lies in the S-band at around 3 GHz for an operation in TM01 mode. Powered by a 511-kV voltage signal for a duration of 45 ns, the design under consideration operates with an injected electron beam of mean voltage and mean current of around 508 kV and 19 kA, respectively. Full-wave 3-D modeling is performed using well-tested electromagnetic particle-in-cell codes such as Computer Simulation Technology Particle Studio and Magic. Simple rules for designing and installing the reflectors are given. The number of reflectors required to maximize the efficiency is discussed. The power conversion efficiency is shown to be improved over a classical axial vircator design by a factor of 12.8. A maximum mean output power of about 1.26 GW is delivered off-axis in the S-band at around 3 GHz, with an efficiency of nearly 13%. Besides, it is also shown that increasing the number of reflectors allows switching the operation mode from TM01 to TE11 along with a shift of MWfrequency from the S- to the L-band. A five- or six-reflector configuration is predicted to generate MW at both 2.86 and 1.4 GHz with conversion efficiencies ranging from 3.5% to 6.6%. A vircator including seven reflectors is expected to operate in TE11 mode at 1.4 GHz with an efficiency of about 8%.